Lenkeng HDMI Matrix over IP 1080p Transmitter LKV383Matrix-TX
Product code: 17983420 // MPN: LKV383Matrix-TX
The Lenkeng LKV383Matrix-TX is a 1080p HDMI over IP transmitter designed to work as part of Lenkeng's HDMI Matrix over IP system. This device allows you to distribute HDMI signals over a local network (LAN), enabling flexible multi-room setups where sources can be switched and viewed on different displays.
-
HDMI over IP Transmission
-
Transmits 1080p Full HD video and audio over a standard Ethernet network (LAN).
-
Supports real-time, low-latency streaming.
-
-
HDMI Matrix Functionality
-
Works with the corresponding LKV383Matrix-RX receiver(s) to create a flexible HDMI matrix system.
-
Multiple transmitters and receivers can be connected, allowing any source to be viewed on any display (depending on the system’s capacity).
-
-
Network-Based Distribution
-
Uses standard CAT5e/6/7 cables for transmission (up to 100m per hop).
-
Can be extended using network switches for larger setups.
-
-
HDMI Compatibility
-
Supports HDCP 1.4 (may not work with HDCP 2.2-protected content like some 4K Blu-rays).
-
Video resolutions up to 1920×1080@60Hz.
-
Supports LPCM 2.0 audio (may not support advanced formats like Dolby Atmos).
-
-
IR Remote Control Pass-Through
-
Some models support IR extension, allowing remote control of source devices from the display location.
-
-
Plug-and-Play Setup
-
Typically requires minimal configuration—just connect to the network and pair with receivers.
-
Video
-
Max Resolution: 1080p (1920×1080 @ 60Hz)
-
Supported Resolutions: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
-
Color Depth: 8-bit
-
HDCP Support: HDCP 1.4 (may not work with HDCP 2.2 content)
-
Compression: Possible light compression (not lossless)
Audio
-
Supported Formats:
-
LPCM 2.0 (Stereo)
-
Dolby Digital (AC3, 5.1 passthrough, if supported by source)
-
DTS (passthrough, if supported)
-
-
No Support for: Dolby TrueHD, DTS-HD, or Atmos (due to bandwidth limitations)
Network & Transmission
-
Transmission Method: HDMI over IP (H.264 encoding likely)
-
Connection: Ethernet (RJ45, 10/100Mbps)
-
Max Distance: Up to 100m per hop (via Cat5e/6/7)
-
Network Requirements: Works on a local LAN (Gigabit switch recommended for multiple streams)
-
Latency: Typically <150ms (not ideal for competitive gaming)
Input & Output
-
HDMI Input: 1 × HDMI (Female)
-
Ethernet Port: 1 × RJ45 (for network connection)
-
IR Control: 1 × 3.5mm IR jack (for remote control extension)
-
USB Power: 5V/1A (usually via included power adapter)
Power & Dimensions
-
Power Supply: 5V DC (USB-powered or included adapter)
-
Power Consumption: ~3W
-
Dimensions: ~80mm × 60mm × 25mm (varies by model)
-
Operating Temperature: 0°C – 40°C (32°F – 104°F)
